How to change the polishing wheel quickly
Source: http://seocai.com Time: 2018/11/9 11:50:48
In the polishing process, the polishing wheel is the first component of the polishing machine equipment. Its effect is to rub the appearance of the punishment products on the work table to achieve the effect of polishing.
The polishing wheel is composed of a hexagonal shaft passing through 42-45 pieces of cloth wheels and 80 pieces of paper spacers. The dumb part is placed on the top right of the picture. It can be removed by twisting the screw with a hex key. It should be noted here that the chuck must not be reversed during removal and installation. Originally, the chuck must be installed on the other side. If it is not used hard, it will cause increased jitter when the polishing wheel moves. In serious cases, it will cause polishing. The inner bearing of the wheel boom is damaged.
Time is the money. Learn how to improve efficiency in the process of using a flat active polishing machine. This polishing wheel and chuck are simple and common, but easy to install. Compared with gold casting their nylon sleeve chucks, you do n’t know him. How to take it out.